无锡环氧地坪因为它的样式美观，耐用，防尘，所以收到了广大消费者的喜爱，它主要应用于洁净要求高的医药生产车间，停车场，电子厂房等区域。而我们在实际施工的过程中，偶尔会出现环氧地坪“变脸”发花的情况，阿么针对这种情况，具体的原因是什么呢?接下来环氧地坪厂家小编给大家讲解一下!

Because of its beautiful style, durability and dust-proof, epoxy flooring has received the favor of consumers. It is mainly used in pharmaceutical production workshop, parking lot, electronic workshop and other areas with high requirements for cleanliness. And in the actual construction process, occasionally the floor "face change" blossom situation, Amu in view of this situation, what is the specific reason? Next, epoxy floor manufacturers Xiaobian to explain to you! 一、表面有小气泡，整体颜色深浅不一致，环氧地坪局部出现发白。

First, there are small bubbles on the surface, the overall color is not uniform, and the floor is partly white.

这主要是因为环氧地坪的材料消泡能力差，可选择更强的消泡剂进行消泡处理，同时可以调整填料和活性稀释剂的比例，减少填料，增加火星稀释剂;再者选择黏度小，但固化时间长的固化剂。

This is mainly due to the poor defoaming ability of epoxy flooring materials, the stronger defoamer can be selected for defoaming treatment, while adjusting the proportion of filler and active diluent, reducing filler, increasing Mars diluent; and the curing agent with low viscosity but long curing time can be selected.

二、灰色的材料容易发花

2. Grey materials are prone to blossom

颜料中钛白比较重，碳黑最轻，这导致在配置灰色的材料时，两种颜色颗粒由于重量的原因出现分层。一般要求一份黑他碳需要一分助剂，大约两分环氧和两份活性稀释剂来配制色浆，一般研磨三遍以上

Titanium dioxide is heavier and carbon black is lightest in the pigments, which results in the layering of two color grains due to weight. Usually one black carbon needs one assistant, about two epoxy and two active diluents to prepare the color paste, which is grinded more than three times.

三、出现局部颜色不一。

Thirdly, the local color is different.

环氧地坪材料配置时使用杂牌树脂，导致对颜料分散系统造成干扰。

The use of miscellaneous resins in epoxy flooring materials can interfere with the pigment dispersion system.