环氧地坪养护蜡的施工非常方便，只需要将养护蜡均匀的辊涂在环氧地坪漆漆膜表面，然后使用洗涤翻新机进行抛光、压实就行。不过蜡养护层，很容易用锋利的物质刮下来，所以要尽量的薄一点，这样才不至于降低环氧地坪漆的功效，又能起到养护的目的。耐磨地坪小编浅谈为什么要对环氧地坪进行打蜡养护?

The construction of epoxy floor maintenance wax is very convenient. It only needs to coat the uniform roller of the maintenance wax on the surface of the floor paint film, and then use the washing and renovating machine to polish and compact it. However, wax curing layer, it is easy to scrape off with sharp substances, so try to be as thin as possible, so as not to reduce the efficacy of epoxy floor paint, but also can play a maintenance purpose. Wear-resistant flooring knitting brief talk about why the epoxy flooring wax maintenance? 1、光亮，打蜡可以起到增亮的效果。对于一些需要更光亮的环氧地坪体验的客户，有些地坪公司就会使用打蜡进行增亮处理。一般来说打蜡可以将地坪亮度提高到80左右。

1. Bright, waxing can play a brightening effect. For some customers who need a brighter floor experience, some floor companies will use waxing to brighten the floor. Generally speaking, waxing can increase the brightness of the floor to about 80.

2、耐磨，用户做养护作用的蜡表层非常坚硬，可以提高地坪的硬度，而且等于在环氧地坪漆的表层再一次强化，起到保护的作用。

2. Wear-resistant, user-friendly wax surface is very hard, can improve the hardness of the floor, and is equivalent to strengthening the surface of epoxy floor paint again, playing a protective role.

3、环保，养护蜡属于水性材料，对地面没有腐蚀性，不会对环氧地坪漆漆膜造成损害，同时不会挥发出对人体有害的气体，可以放心使用。

3. Environmental protection, maintenance wax belongs to water-borne materials. It is not corrosive to the ground and will not cause damage to the epoxy floor paint film, and will not volatilize harmful gases to human body. It can be used safely.

环氧地坪打蜡养护的步骤：

The steps of waxing and curing epoxy floor are as follows:

1、清理地面垃圾和杂物,竖立施工指示牌，地面清洁，首先用洗地机加中性清洁剂将地面清洗干净，然后用吸尘器洗尽地面污水。如果用全自动洗地机清洁地面效果将更好。然后晾干地面，等待下一步工序。

1. Clean up the ground rubbish and debris, erect construction signs, and clean the ground. First, clean the ground with a floor washer and neutral detergent, and then wash the ground sewage with a vacuum cleaner. It would be better to clean the floor with a fully automatic floor washer. Then dry the ground and wait for the next step.

2、布蜡，用蜡拖将环氧地坪蜡呈“∞”字形均匀拖布到地面上。在拖布时要注意每次蘸取蜡量要尽量均匀一致，由前向后依次操作。另外要注意的是对于大面积环氧地坪布蜡可将多名工人一字排开，并穿好鞋套，同时操作，不得遗漏。布蜡后待蜡层晾干后可根据实际情况进行二次布蜡，方法同第一次。

2. To distribute wax, the epoxy floor wax is evenly distributed to the ground in the shape of ____________ When mopping cloth, attention should be paid to the uniform amount of wax dipped in each time, and the operation should be from front to back. In addition, it should be noted that for large area of epoxy floor wax, many workers can be arranged word by word, and wear shoes, while operating, not to be omitted. After the wax layer is dried, the wax can be distributed twice according to the actual situation. The method is the same as the first one.

3、抛光，待蜡层干透后可以用抛光机加抛光垫对环氧地坪做抛光处理，增加地面光泽度。

3. Polishing. After the wax layer is dried out, the epoxy floor can be polished with a polishing machine and a polishing pad to increase the gloss of the ground.

在地面打蜡后的小时内地面尽量不要使用，尤其是车辆及重物不得碾压或拉划。环氧地坪打蜡保养的周期需要根据实际的使用情况确定，下次打蜡时需要将原有蜡层去除，方可获得最佳效果。

Do not use it on the ground for hours after waxing, especially vehicles and heavy objects should not be rolled or drawn. The maintenance cycle of epoxy floor waxing needs to be determined according to the actual use. The original wax layer needs to be removed in the next waxing process in order to obtain the best effect.

4、等到底蜡干燥后,再在其表面均匀的落两遍面蜡并风干;

4. After the base wax is dried, the wax is evenly dropped twice on its surface and dried by air.

5、在干净干燥的地板表面均匀落两遍底蜡并风干;

5. Drop the bottom wax twice on the clean and dry floor surface and air-dry it.