所谓的电子厂，也就是生产电子产品的工厂。电子厂产品包括电子、微电子、通讯、计算机、精密仪器等电子产品行业。由于电子产品比较敏感，静电的聚集将严重影响电子产品的品质和各种精密仪器的正常工作，生产环境中的静电会严重影响产品质量。

The so-called electronic factory, that is, the production of electronic products factory. Electronic products include electronics, microelectronics, communications, computers, precision instruments and other electronic products industry. Due to the sensitivity of electronic products, electrostatic agglomeration will seriously affect the quality of electronic products and the normal operation of various precision instruments, electrostatic production environment will seriously affect product quality.

防静电环氧地坪

Antistatic Epoxy Floor

对于电子厂来说，能最大程度提升车间环境质量的最佳手段莫过于在生产车间地面施工环氧防静电地坪漆了。环氧防静电地坪漆适合电子厂地面的原因有：

For the electronic factory, the best way to maximize the environmental quality of the workshop is to apply epoxy anti-static floor paint on the floor of the workshop. The reason why the epoxy antistatic floor paint is suitable for the surface of the electronic factory is as follows:

1、防尘洁净

1, dust-proof cleanliness

对于电子厂来说，生产环境的洁净度无疑是相当重要的一个因素。环氧地坪漆是一种表面涂料，在厂房车间地面施工地坪漆后，能形成致密耐磨的环氧地坪涂层，有效防止地面起尘，营造洁净无尘的生产车间环境。

For the electronics factory, the cleanliness of the production environment is undoubtedly a very important factor. Epoxy floor paint is a kind of surface paint. It can form dense and wear-resistant epoxy floor coatings after floor paint is applied in workshop floor, effectively prevent dust from floor, and create a clean and dust-free workshop environment.

2、防静电

2, antistatic

防静电地坪是环氧地坪的一种，它使用的是防静电地坪漆，同时在环氧地坪涂层中增加了导电铜网，可以将生产车间产生的静电导入地下，防止静电影响电子产品质量。

Anti-static floor is a kind of epoxy floor, it uses anti-static floor paint, and adds conductive copper mesh to the epoxy floor coating, which can lead the static electricity generated by the production workshop into the ground to prevent static electricity from affecting the quality of electronic products.

随着社会的不断发展进步，电子产品质量的提升除了要从技术方面着手，也要注意硬件的提升，施工环氧防静电地坪漆，能有效的降低精密电子产品成品的返修率和耗损，在生产过程中降低携带低压静电对精密电子产品的危害。

With the continuous development and progress of society, the improvement of electronic quality should not only start from the technical aspects, but also pay attention to the improvement of hardware. The construction of epoxy anti-static floor paint can effectively reduce the repair rate and loss of precision electronic products, and reduce the harm of carrying low-voltage static electricity to precision electronic products in the production process.